DO-IT-YOURSELF MAINTENANCE 6- 19
G180A01A-AAT
CHECKING BRAKE PEDAL
CLEARANCE
G170A01A-AAT
CHECKING BRAKE PEDAL
FREE-PLAY
With the engine off, press down on the brake
pedal several times to reduce the vacuum in the
brake booster.
Then, using your hand, press down slowly on
the brake pedal until you feel a change in
resistance. This is the brake pedal free-play.
The free-play should be within the limits speci-
fied in the illustration above. If it is not, have it
inspected by your Hyundai dealer and adjusted
or repaired if necessary.
You need a helper to check the brake pedal
clearance. With the engine running, have your
helper press down on the brake pedal several
times and then hold it down with a force of about
110 lbs (50 kg, 490 N). The brake pedal clear-
ance is the distance from the top surface of the
brake pedal to the asphalt sheeting under the
floor mat.
If the brake pedal clearance is not within the
limits specified in the illustration, have it in-
spected by your Hyundai dealer and adjusted
or repaired if necessary.
HXGS508 G180A01L
G190A01A-AAT
CHECKING DRIVE BELTS
0.12 ~ 0.31 in.
(3 ~ 8 mm)
2.95 in. (75 mm)
HSM396
2.7 V6 2.4 DOHC
COMP
Eng.pulley
Eng.pulley
COMP
0.315 in.
Power steering
Power steering
Auto tensioner
Generator
Generator
Eng.coolant
0.30~0.48 in.
0.24~0.35 in.
G140D02L
3.5 V6
Crank shaft apulley
A/C pulley
Power steering pulley
Generator
To Next Page
Loading...
Need help?
General
