1
FEATURES OF YOUR HYUNDAI
75
1
FEATURES OF YOUR HYUNDAI
75
To operate the headlights, turn the barrel on
the end of the multi-function switch. The first
position turns on the parking lights, side-
lights, tail lights and instrument panel lights.
The second position turns on the headlights.
NOTE:
The ignition must be in the "ON" position
to turn on the headlights.
B340C05A-AAT
Headlight Switch
B340C02MC
B340B01A-AAT
Lane Change Signal
To indicate a lane change, move the
lever up or down to a point where it
begins flashing.
The lever will automatically return to the
center position when released.
B340B01MC
MULTI-FUNCTION LIGHT
SWITCH
B340A01A-AAT
COMBINATION TURN SIGNAL,
HEADLIGHT AND LOW-BEAM
SWITCH
Turn Signal Operation
Pulling down on the lever causes the turn
signals on the left side of the car to blink.
Pushing upward on the lever causes the
turn signals on the right side of the car to
blink. As the turn is completed, the lever
will automatically return to the center
position and turn off the turn signals at the
same time. If either turn signal indicator
light blinks more rapidly than usual, goes
on but does not blink, or does not go on
at all, there is a malfunction in the system.
Check for a burned-out fuse or bulb or
see your Hyundai dealer.
To Next Page
Loading...
Need help?
General
