1
FEATURES OF YOUR HYUNDAI
108
B541A01TG-GAT
Trunk Lid Control Button
The trunk lid control button located in the
vehicle glove box is used to prevent unau-
thorized access to the trunk.
Locking
To activate the trunk lock system so that the
trunk can only be opened with the master
key, perform the following:
1. Open the glove box.
2. Set the trunk lid control button to "OFF"
position (not depressed).
3. Close the glove box and lock the glove
box with the master key.
B541A01TG
!
WARNING:
The trunk lid should always be kept com-
pletely closed while the vehicle is in
motion. If it is left open or ajar, poisonous
exhaust gases may enter the car and
serious illness or death may result. See
additional warnings concerning exhaust
gases on page 2-2.
To close, lower the trunk lid, then press
down on it until it locks. To be sure the trunk
lid is securely fastened, always check by
trying to pull it up again.
HTG2017
TRUNK LID
B540A01S-GAT
Remote Trunk Lid Release
To open the trunk lid without using the key,
pull up the lid release lever.
HTG2014
To Next Page
Loading...
Need help?
General
