1
FEATURES OF YOUR HYUNDAI
110
* The A/C or the air intake control switch
returns to its former setting.
NOTE:
o The air intake control switch will
change to "
" mode when the
ignition switch is turned "ON" with
the MAX A/C mode selected.
o When you change to another mode
from MAX A/C, the A/C and the air
intake control switch are set as
shown in the following chart.
A/C
ON
ON or OFF *
OFF
ON or OFF *
ON
ON
Air Intake
Control Switch
or *
OFF
B670E02A-AAT
Temperature Control
This control is used to adjust the degree
of heating or cooling desired.
Cool
Warm
B670E01MC
B670D08MC
OFF-Level
Air is discharged through the windshield
defroster nozzle, side defroster nozzle
and side ventilator.
NOTE:
If the air flow control is off, the air intake
control is set to the fresh mode auto-
matically.
To Next Page
Loading...
Need help?
General
