Features of your vehicle
744
Auto light position (if equipped)
When the light switch is in the AUTO light
position, the taillights and headlights will
be turned ON or OFF automatically
depending on the amount of light outside
the vehicle.
High - beam operation
To turn on the high beam headlights,
push the lever away from you. Pull it back
for low beams.
The high-beam indicator will light when
the headlight high beams are switched
on.
To prevent the battery from being dis-
charged, do not leave the lights on for a
prolonged time while the engine is not
running.
OBK049048N OBK049050N
CAUTION
• Never place anything over the
sensor (1) located on the instru-
ment panel, this will ensure better
auto-light system control.
• Don’t clean the sensor using a
window cleaner, the cleaner may
leave a light film which could
interfere with sensor operation.
• If your vehicle has window tint or
other types of coating on the
front windshield, the Auto light
system may not work properly.
EL ENG 4A.QXP 10/8/2010 3:02 PM Page 74
To Next Page
Need help?
General
