5-21
Driving your vehicle
5
The Smart Regeneration System
controls the regenerative braking
automatically according to the road
gradient and driving condition of the
vehicle in front. The system mini-
mizes the unnecessary operation of
the brake and acceleration pedal,
improving the fuel efficiency and
assisting the driver.
System Setting
The Smart Regeneration System is
enabled when:
The gear is in P (Park) and select
'User settings → Convenience →
Smart Regeneration' on the User
Settings mode.
The setting is maintained when the
vehicle is restarted.
Activating the Smart
Regeneration System
With 'AUTO' for the regenerative
braking level displayed on the clus-
ter, the regenerative braking level is
controlled automatically when vehi-
cle speed is above 10 km/h (6 mph)
and one of the condition below is
met.
- The road gradient changes
- Distance from the vehicle ahead
reduces or increases
- Speed of the vehicle ahead
reduces or increases
SSMMAARRTT RREEGGEENNEERRAATTIIOONN SSYYSSTTEEMM ((IIFF EEQQUUIIPPPPEEDD WWIITTHH SSMMAARRTT CCRRUUIISSEE CCOONNTTRROOLL SSYYSSTTEEMM))
OOSEV048205N
When vehicle speed is under 10
km/h (6 mph), the Smart
Regeneration System is can-
celled. The driver must adjust
the vehicle speed by depress-
ing the accelerator or brake
pedal according to the road
condition ahead and driving
condition.
WARNING
To Next Page
Loading...
Need help?
General
