© Copyright IBM Corporation 2019, 2020, 2021. Customer Install Guide, 2U Chassis 22
Package Contents
The shipping carton contains:
• Chassis (enclosure)
• Cable management arm box
The cable management arm box includes the following parts:
– One cable management arm
– Two Velcro straps (pre-attached)
– Seven cable baskets (pre-attached)
– Three slide mounting clips
• Cable box (DO NOT DISCARD!) - Keep with chassis after it is installed in the
rack
The cable box includes the following parts:
– Two power cords
• Slide box kit
The slide box kit includes the following parts:
– One right slide
– One left slide
– Two M5 screws
– Two washers
• I/O kit (DO NOT DISCARD!) - Keep with chassis after it is installed in the rack
The I/O kit includes the following parts:
– Two blue RJ45 cables
– Five grey RJ45 cables
– Eight 3m fiber cables
– One Safety DVD
– This document
• Transceiver kit (DO NOT DISCARD!) - Keep with chassis after it is installed in
the rack
The transceiver kit includes the following parts:
– Sixteen transceivers
Note: KEEP ALL POWER CORDS, SIGNAL CABLES AND TRANSCEIVERS
WITH THE INSTALLED CHASSIS FOR USE BY IBM INSTALLERS.
To Next Page
Loading...
Need help?
General
