Forms Thickness Control Lever
The
Forms Thickness
Control
lever adjusts the position
of
the print
head
to allow room for single sheets
or
multiple-copy forms. Move the lever toward the rear
for single sheets,
and
toward the front for
multiple-copy forms.
This lever
can
affect print darkness.
If
the printing is
too
light, move the lever toward the rear
of
the printer;
if the printing
is
smeared, move the lever toward the
front.
The
best
position for the lever is as far to the
front
of
the printer as possible while still getting good
print with a good condition ribbon installed.
Warning: Positioning the Forms Thickness Control
lever
too
far to the rear for the forms being used
will result in premature wear
of
the print head
and
platen.
Forms
Thickness
Control
Lever
Right
Side
5-
70
IBM Color Printer
To Next Page
Loading...
Need help?
General
