External DVD drive for the 9008-22L, 9009-22A, 9009-41A,
9009-42A, 9223-22H, or 9223-42H
Find information about managing external DVD drives.
The following features are electromagnetic compatibility (EMC) Class B features. See the Class B Notices
in the Hardware Notices section.
Table 1. Electromagnetic compatibility (EMC) Class B features
Feature code (FC) Description
EUA5 Standalone USB DVD Drive
Standalone USB DVD drive (FC EUA5)
Learn about the specifications of the feature code (FC) EUA5 DVD drive.
The Standalone USB DVD drive (FC EUA5) is an optional, standalone external USB-DVD device. It
requires high current at 5V and must use the front USB 3.0 port on the 9008-22L, 9009-22A, 9009-41A,
9009-42A, 9223-22H, and 9223-42H systems.
Specifications
v Field replaceable unit (FRU): 01LU635
v Custom card identification number (CCIN): 6331 model 005
v Media:
– Reads CD-ROM, CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW, DVD-ROM, and DVD-RAM
discs
– Writes 4.7 GB DVD-RAM discs
– CD read speed at 24X.
– DVD-ROM read speed at 8X
– DVD-RAM at 5X.
– DVD-RAM has a write speed of 5X.
– The buffer size is 0.75 MB and cannot be disabled.
v Interface: USB
v Connector: USB 2.0
v Loading tray: supports 12 cm and 8 cm discs
v Operating positions: horizontal only (on a flat stable surface or floor)
Note: A USB extension cable is included (P/N 32N1311). The USB extension cable is to be used when
there are no safe, flat spots available in the rack. This cable allows the drive to reach the floor.
Alternate or additional extension cables are not supported as the total USB cable length can be no
longer than 3 meters.
v Form factor: standalone USB DVD drive
v DVD video: not supported
© Copyright IBM Corp. 2018 1
To Next Page
Loading...
Need help?
General
