ENGLISH
Connecting your monitor
1. Connect the signal cable to the video port on the back of
your computer (figure A). Your computer may have a video
adapter card installed. In this case, attach the signal cable
to the connector on the video adapter card (figure B).
2. Connect the power cord to the monitor first, then firmly
insert the plug into a properly grounded electrical outlet.
3. Turn on the monitor, and then the computer.
If your monitor does not seem to be working correctly, refer to
the
Troubleshooting
section on page 18 for help.
3
B
A
To Next Page
Loading...
Need help?
General
