The display mode the monitor uses is controlled by the
computer. Therefore you should refer to your computer
documentation for details on how to change display modes.
The image size, position and shape may change when the
display mode changes. This is normal and the image can be
readjusted using the monitor controls.
To ensure flicker-free operation, select the highest (non-
interlaced) refresh rate both the computer and the monitor can
support, (generally 75 Hz or higher), for the addressability that
your application requires.
For the display modes listed below, the screen image has
been optimised during manufacture.
Display modes
Addressability
720 x 400 70 Hz 31.5 kHz
720 x 400 85 Hz 37.9 kHz
640 x 480 60 Hz 31.5 kHz
640 x 480 75 Hz 37.5 kHz
640 x 480 85 Hz 43.3 kHz
800 x 600 75 Hz 46.9 kHz
800 x 600 * 85 Hz 53.7 kHz
1024 x 768 75 Hz 60.0 kHz
1024 x 768 ** 85 Hz 68.7 kHz
MFI 2 75 Hz 41.8 kHz
14
Horizontal
Frequency
Refresh
Rate
Table 1. Factory Preset Mode
* Recommended mode for G54
** Recommended mode for G74
Further information
To Next Page
Loading...
Need help?
General
