ENGLISH
Screen is blank and
power indicator is
steady yellow or
steady amber.
Image appears to be
flickering.
Further information
section starting on page
14
Press any key on the keyboard or move
the mouse to restore operation.
Check the computer is powered on.
Check the signal cable is firmly connected
to the computer.
Check no pins are bent in the signal cable
connector.
Reconfigure the computer to use a non-
interlaced display mode with a refresh
rate of at least 75 Hz.
Move fluorescent desk lighting or any
equipment that produces magnetic fields
further away from the monitor.
The monitor is operating in
an interlaced or low refresh
rate display mode.
The monitor may be affected
by interference from nearby
equipment.
The monitor is in Power
Management Standby /
Suspend or Off state.
No video signal from the
computer.
Possible Cause
Problem
Suggested Action Reference
19
If another monitor is close by, a separa-
tion distance of at least 12 inches
(300mm) is recommended.
To Next Page
Loading...
Need help?
General
