Failing Item Description Document Description
GXC7777 Electrical interference
GXC8888 Other workstation on port is failing
GXC9999 Error occurred with pass-through command
GXCBBBB Too many devices are active on the workstation
IOP
GXCEEEE Active device turned off
GXCLINK Communications network equipment
UXCFF00 User suspected problem
(B2xx) Logical Partition Reference Codes
The code that logically partitions the system detected an error in the logical
partition. These reference codes are posted in the Partition Status screens under the
SST/DST Work with system partitions option.
1. Characters 3 and 4 of word 1 are the partition ID of the logical partition with
the problem.
2. Find the unit reference code in the following table.
For more on the Failing Item column entries, see Logical Partition Failing Items
Details, which follows the reference code table below.
Table 1. (B2xx) Logical Partition Reference Codes
Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
1210 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Read and understand the information about logical partitions.
See the iSeries Service Functions information.
Look in the Primary partition’s Service Action Log for a B6005090 during
the secondary partition IPL. Use that SRC and go to RCT.
If you do not find a B6005090 in the Service Action Log of the Primary
partition then look for any SRC which was logged during the IPL of the
Primary partition. Search the Service Action Log first and if you do not
find an SRC there then search the Product Activity Log. Use the new SRC
and go to RCT.
FI00580
1220 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Read and understand the information about logical partitions.
See the iSeries Service Functions information.
Initiate a Primary partition main storage dump then contact your next level
of support.
FI00099
1230 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. See the iSeries Service Functions information.
This is a partitioning configuration problem. The partition is lacking the
necessary resources to IPL. Refer the customer to their software support.
FI00099
LPARCFG
B075
System Reference Codes 225
To Next Page
Loading...
Need help?
General