|A.2 IBM Cassette BASIC
IBM Cassette BASIC (Beginner's All-Purpose Symbolic Instruction Code) is
built into the Model L40 SX to help maintain software compatibility with
other IBM computers. Cassette BASIC is the lowest version of BASIC and is
not intended for production use because no information can be saved. For
|more information about Cassette BASIC and other types of BASIC, refer to
the IBM BASIC manual (not included with this product).
|Note: If your computer has a hard disk drive with an operating system
| already installed, you will not be able to start Cassette BASIC,
| but you can use Cassette BASIC by typing basic and pressing Enter
| at the command prompt.
To start Cassette BASIC:
1. Remove the diskette from the diskette drive.
2. Turn on the computer.
3. When the F1 and diskette prompts appear, press F1.
4. When the following screen appears, Cassette BASIC is loaded and ready
to use:
PICTURE 106
PS/2 Model L40 SX Quick Reference
IBM Cassette BASIC
¦ Copyright IBM Corp. 1991
A.2 - 1
To Next Page
Loading...
Need help?
General