Removing the cover
Important:
Read “Safety Information” on page v and “Handling static-sensitive devices”
on page 35 before removing the cover.
To remove the cover:
1. Shut down your operating system, remove any media (diskettes, CDs, or tapes)
from the drives, and turn off all attached devices and the computer.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer.
4. Press the buttons on the sides of the computer and pivot the rear end of the
cover up toward the front of the computer.
Chapter 3. Types 8305, 8306, 8309, and 8313 39
To Next Page
Loading...
Need help?
General
