IBM Personal System/2 60 User Manual

Specifications
| The following figure describes system board performance.
Access to Channel:
Single Transfer:
Burst Transfers:
Number
Device of Waits Cycle Time (ns)
Microprocessor (10 MHz — 100 ns Clock):
Access to System Board RAM 1 300
Access to System Board ROM 1 300
Default Transfer Cycle:
I/O Access 1 300
Memory Access 0 200
Synchronous Extended Transfer Cycle 1 300
Refresh Rate 500 (min)
(Typically performed every 15.1 ys)
Bus Master Access to System Board RAM 300 (min)
DMA Controller (10 MHz ~ 100 ns Clock):
300 + I/O Access + Memory Access
300 + (1/0 Access + Memory Access)N *
System Board Memory Access 300
Default Transfer Cycle:
1/0 Access 300
Memory Access 200
Synchronous Extended Transfer Cycle 300
* N is the number of transfers in the burst.
Figure 1-4. Performance Specifications — System Board
Model 60 System Overview — October 1990 1-7

IBM Personal System/2 60 Specifications

General

Brand	IBM
Model	Personal System/2 60
Category	Desktop
Language	English