dmesg | grep -i cdc ether
Use the ifconfig command to configure the interface to have an IP address in the
range 169.254.xxx.xxx. For example:
ifconfig IMM2_device_name 169.254.1.102 netmask 255.255.0.0
This interface is configured to have an IP address in the 169.254.xxx.xxx range
each time that the operating system is started.
Using the ServerGuide Setup and Installation CD
The ServerGuide Setup and Installation CD provides software setup tools and
installation tools that are designed for your server. The ServerGuide program
detects the server model and hardware options that are installed and uses that
information during setup to configure the hardware. Use this CD during the initial
installation of the server to simplify the operating-system installations by providing
updated device drivers and, in some cases, installing them automatically. To
download the CD, go to http://www.ibm.com/support/entry/portal/
docdisplay?lndocid=SERV-GUIDE and click IBM Service and Support Site.
Note: Changes are made periodically to the IBM website. The actual procedure
might vary slightly from what is described in this document.
To start the ServerGuide Setup and Installation CD, complete the following steps:
1. Insert the CD, and restart the server. If the CD does not start, see “ServerGuide
Problems” in the Problem Determination and Service Guide on the System x
Documentation CD.
2. Follow the instructions on the screen to:
a. Select your language.
b. Select your keyboard layout and country.
c. View the overview to learn about ServerGuide features.
d. View the readme file to review installation tips for your operating system and
adapter.
e. Start the operating-system installation. You will need your operating-system
CD.
The ServerGuide program has the following features:
v An easy-to-use interface
v Diskette-free setup, and configuration programs that are based on detected
hardware
v ServeRAID Manager program, which configures your ServeRAID adapter
v Device drivers that are provided for your server model and detected hardware
v Operating-system partition size and file-system type that are selectable during
setup
ServerGuide features
Features and functions can vary slightly with different versions of the ServerGuide
program. To learn more about the version that you have, start the ServerGuide
Setup and Installation CD and view the online overview. Not all features are
supported on all server models.
64 System x3100 M4 Type 2582: Installation and User's Guide
To Next Page
Loading...
Need help?
General