CHECKOUT GUIDE
Detecting system information with
PC-Doctor
PC-Doctor can detect following system information:
Hardware Info:
System Configuration
Memory Contents
Physical Disk Driver
Logical Disk Driver
VGA Information
IDE Drive Info
PCI Information
PNPISA Info
SMBIOS Info
FRU Info
Utility:
Run External Tests
Surface Scan Hard Disk
Benchmark System
DOS Shell
Tech Support Form
Battery Rundown
View Test Log
Print Log
Save Log
Full Erase Hard Drive
Quick Erase Hard Drive
Power system checkout
To verify the symptom of a problem, do the following:
1. Power off the computer.
2. Remove the battery pack.
3. Connect the AC Adapter.
4. Check that power is supplied when you power on the
computer.
5. Power off the computer.
6. Disconnect the AC Adapter and install the charged
battery pack.
7. Check that power is supplied by the battery pack
when you power on the computer.
If you suspect a power problem, see the appropriate one
of the following power supply checkouts:
“Checking the AC Adapter” on page 11
“Checking operational charging” on page 11
“Checking the battery pack” on page 12
“Checking the backup battery” on page 12
10 ThinkPad 600X Hardware Maintenence Manual
To Next Page
Loading...
Need help?
General
