Adjusting the set temperature
1. Flick the power switch to the ON position. The red power light and blue screen will light up.
2. To display the set temperature, hold down the SET button.
3. To adjust the set temperature, hold down the SET button whilst pressing either the UP or DOWN button until the
desired set temperature is displayed.
4. When your ICECO is running it will operate at 2˚C either side of set temperature. For example, with your ICECO set
at 0˚C it will run until reaches –2˚C and then stop. The green energy saving light illuminates when the compressor
is cycled off. The compressor will cut back in when the cabinet cycled off. The compressor will cut back in when the
cabinet temperature reaches +2˚C.By running 2˚C either side of the set temperature the compressor will not cut in and
out excessively and this will reduce your power consumption.
USING THE CONTROL PANEL
2
MEASUREMENTS
CONTROL PANEL
Keep things cool and frozen at the same time.
The ICECO can be used as a dedicated fridge, dedicated freezer or as a fridge, keep-freeze and crisper at the
same time. Simply set the thermostat to 25ºF, use your top basket as a crisper, your middle basket as a fridge and
the lower basket to keep things frozen. You’ll also get easy access to your food using the handy lift-out baskets,
so no more rummaging required.
EXPANDABLE
To Next Page
Loading...
Need help?
General
