KEY FUNCTION SECONDARY FUNCTION ( +key) OTHER FUNCTIONS
Toggles between opening and closing the
squelch.
Starts and stops scanning. (p. 37)
Starts and stops priority watch. (p. 42)
Selects high output power. (p. 19)
Selects mid output power. (p. 19)
Selects low output power. (p. 19)
Selects –duplex. (p. 21)
Selects +duplex. (p. 21)
Selects simplex. (p. 21)
No primary function.
• Clears a digit before entry. (p. 17)
• Cancels the scan, priority watch or DTMF
memory function. (pgs. 16, 37, 43)
Enters set mode and advances the set mode
selection.
• Sets the keypad for numeral input. (p. 17)
• Decreases the set mode selection order
after entering set mode.
No primary function.
No primary function.
No primary function.
No secondary function.
No secondary function.
Turns the one-touch PTT function ON and
OFF. (p. 20)
No secondary function.
No secondary function.
Turns the DTMF memory encoder function
ON. (p. 44)
Turns the subaudible tone encoder ON.
(p. 21)
Turns the pocket beep function ON.
(p. 46)
Turns the tone squelch function ON.
(p. 46)
While being pushed, transmits a 1750 Hz
tone. (p. 22)
• Writes the VFO contents into the memory
channel or call channel. (pg. 29)
• Advances the memory channel number
when continuously pushed after program-
ming is completed. (p. 28)
DTMF memory OFF.
Turns the subaudible tone encoder, pocket
beep or tone squelch OFF. (pgs. 21, 46, 47)
Mutes the audio. (p. 18)
• Mute function is released when any operation is
performed.
Locks the digit keys on the keypad (including
the A–D, # and
M keys). (p. 14)
Sends a 1750 Hz tone signal for 0.5 sec.
(p. 22)
After is pushed:
Transmit the appropriate
DTMF code.
(pgs. 22, 45)
Push [0] to [9], [A] to [D]
to transmit the DTMF
memory contents when
the DTMF memory
encoder is activated.
(p. 44)
After is pushed:
Transmit the appropriate
DTMF code. (p. 45)
■ Microphone keypad—q
* The number in ( ) indicates the instruction’s page number.
[A] to [D] to transmit the
DTMF memory (p. 44)
A-6146D-1EX
To Previous Page
Loading...
Need help?
General
