EasyManuals Logo
Home>Icom>Radio>IP501H

Icom IP501H Guide

Icom IP501H
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GUIDE
1. SUPPLIED ACCESSORIES
2. PANEL DESCRIPTION
3. ATTACHING THE BELT CLIP
4. ATTACHING THE ANTENNA/HAND STRAP
• Battery pack BP-272 …………………… 1 Belt clip (MB-135) ……………… 1 • Antenna …………………………… 1
• Hand strap ………………………………… 1
*1 Ask your dealer about the assigned function.
*2 While connecting an optional speaker microphone, the audio is
not output from the internal speaker.
NOTE: Instructions and screens on this guide may differ,
depending on the settings.
NOTE: You can use only the supplied antenna.
LRemove the battery pack before attaching the belt clip.
IP ADVANCED RADIO SYSTEM
Supplied
hand strap
Hold this part to turn.
When connecting optional equipment
Be sure to turn OFF the
power before connecting
or disconnecting optional
equipment to or from the jack.
Remove the cable by holding
the plug not cable.
Insert the plug securely when
connecting the cable.
CAUTION:
Attach the jack cover when no optional equipment is connected.
Jack cover
Plug
Turn OFF
Supplied antenna
Antenna
[PTT] switch
[Option]
key
*
1
[PWR/VOL]
dial
Function
screen
Keypad
( Refer to
page 3.)
Microphone
Speaker
*
2
[TX/RX] indicator
IP501H
IP503H
Slide the belt clip in the direction of the arrow until
the belt clip locks in place, and makes a ‘click’ sound.
Supplied belt clip
Battery pack
q
w
Lift the tab up q, and slide the belt clip in
the direction of the arrow w.
Thank you for choosing this product.
READ ALL INSTRUCTIONS carefully and completely
before using this product.
11. TRANSMITTING AND RECEIVING
While holding down [PTT], speak into the microphone
at your normal voice level.
The [TX/RX] indicator lights red while [PTT] is pushed.
1
When a Call is received, the [TX/RX] indicator lights
green.
2
Turning OFF the power
Turn [PWR/VOL] maximum counter clockwise until it
makes a "click" sound.
All Call transmitting screen
All
10/4 12:57
All
10/4 12:58
Blinks when a Call is received
Receiving an All Call
While receiving a call, push [PTT] to talk in the full
duplex mode* like a telephone call.
In the Full Duplex mode, the [TX/RX] indicator lights
orange.
3
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the
United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand and/or other countries.
A7415D-2EX-1 Printed in Japan
© 2017–2019 Icom Inc.May 2019
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
Lights red
Lights orange
Lights green
Hold
down
Hold down
Microphone
Microphone
Speaker
Turn
* Depending on a preset. Ask your dealer for detail.
- 1 -
- 4 -

Other manuals for Icom IP501H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom IP501H and is the answer not in the manual?

Icom IP501H Specifications

General IconGeneral
BrandIcom
ModelIP501H
CategoryRadio
LanguageEnglish

Related product manuals