- 29 -
A
D
B
E
F
C
Maintenance work may only be performed by
trained staff.
Danger! Disconnect the mains before
starting any service work or before removing
the cover.
Oil the backgauge (A) control weekly i.e.
grease it. (Use non-resinous oil and grease).
Twice a year the remaining 14
grease parts (B) (see picture).
To do this switch please bring the main switch
to position "0" (E) and move the machine on its
left sidfe.
Danger! of tilting!
Remove cover (C) and lower panel (D) (tools
in tool set).
• Remove remaining paper
• Grease the machine
• Check the two joining bolts and
pushing bar for wear (F). If necessary inform
your service personnel.
• Mount the machine upright
•
Maintenance and cleaning
•
To Next Page
Loading...
Need help?
General
