IKEA ALANG User Manual

6 A A-2173281-1
OPERATION
Safety measures
Important! All works on assembly and installation of the lamp should be per-
formed only with a disconnected power supply!
- It is prohibited to use the lamp in a very humid environment (bathroom, etc.).
- If you use bulbs with higher capacity or of a structure different than those indicated in
the user manual and on the lamp’s marking, the lamp may stop working and result in the
loss of the right for warranty service.
- Clean the lamp with a soft dry cloth.
- Do not use chemically active or aggressive cleaning agents to clean the lamp.
How to use
Inspect the product in order to ensure the integrity of the plug, the power cord and the
lamp. Put the bulb into the lamp. Insert the plug into the socket.
MAINTENANCE
To replace the bulb:
• Disconnect the lamp from the power supply network.
• Give the bulb and the lamp case time to cool down.
• Make sure, that the replacement bulb suits the lamp in terms of type and capacity.
• Remove the old bulb and install the new bulb.
TRANSPORTATION AND STORAGE
The product should be transported and stored in the package in compliance with safety
precautions to avoid mechanical damage and exposure to atmospheric precipitation.
DISPOSAL
The product should be disposed of in compliance with local legal requirements.
The crossed-out wheeled bin symbol indicates that the item should be disposed of
separately from household waste. The item should be handed in for recycling in
accordance with local environmental regulations for waste disposal. By separating
a marked item from household waste, you will help reduce the volume of waste
sent to incinerators or land-ll and minimize any potential negative impact on human
health and the environment. For more information, please contact your IKEA store.
PROBABLE MALFUNCTIONS AND METHODS FOR REMEDY
Important! All works targeted at the remedy of possible malfunction of the
product should be performed only with a disconnected power supply!
The lamp
doesn’t work
- check the supply-line voltage
- make sure that the bulb has suitable voltage and capacity
- check the bulb’s performing capacity
- check the bulb’s position
If these methods were of no use, contact qualied specialists.

IKEA ALANG Specifications

General

Brand	IKEA
Model	ALANG
Category	Lighting Equipment
Language	English