IKEA DATID User Manual

ENGLISH 8
the grease fi lter may become dull; this does
not effect its fi ltering capacity.
Grease fi lter maintenance:
1. Unplug the appliance or disconnect the
power supply.
2. Remove the grease fi lters: pull the spring
release handle, then remove the fi lter
downwards.
3. After cleaning the grease fi lter, remount
in reverse order ensuring the entire
extraction surface is covered.
Charcoal fi lter maintenance
1. Unplug the appliance or disconnect the
power supply.
2. Remove the grease fi lter
3. If charcoal fi lters are already present
(two fi lters fi tted, covering the protection
grids of the motor impeller) and must
be replaced, turn the central handle
anticlockwise to unlock them. Reverse
procedure to install new ones.
4. Refi t the grease fi lter.
Charcoal fi lter is neither lavable nor
regenerable.
Replace the charcoal fi lter every 4
months.
Replacing the Halogen lamps
WARNING: - Only use 20W MAX - G4
halogen lamps.
1. Disconnect the hood from the electric
power supply.
2. Insert the blade of a small fl at
screwdriver where indicated by the
three points, and with a gentlepressure
remove the light cover from its position.
3. Remove the faulty lamp and replace
with a new one.
4. Replace the cover (spring lock system).
IMPORTANT: make sure you don’t
touch the lamp with your hands.

IKEA DATID Specifications

General

Brand	IKEA
Model	DATID
Category	Ventilation Hood
Language	English