IKEA FIXA User Manual

DECLARATION OF CONFORMITY
We declare under our sole responsibility
that this product, FIXA Hammer drill
Li-Ion 14.4 V, is in conformity with the
following standards or standardized
documents: EN 60745-1, EN 60745-2-6,
EN 55014-1, EN 55014-2, EN 61000-3-2, EN
61000-3-3, EN 60335-1, EN 60335-2-29, EN
62233 in accordance with the provisions of
the directives 2006/42/EC, 2004/108/EC,
2006/95/EC, 2002/96/EC, 2002/95/EC.
Technical documentation at: IKEA of
Sweden AB, Box 702, Tulpanvägen 8,
SE-343 81 Älmhult, SWEDEN.
The undersigned is responsible
for compilation of the technical
documentation and makes this declaration
on behalf of IKEA of Sweden AB.
Christina Niemelä Ström
Business Area Manager
IKEA of Sweden AB
ASSEMBLY
Before any work on the machine
(e. g., maintenance, tool change,
etc.) as well as during transport and
storage, set the rota tional direction
switch to the centre posi tion.
Unintentional actuation of the On/Off
switch can lead to injuries.
Battery charging
Charging your hammer drill/driver
When the charger is connected to the
electricity supply, the red diode on the
hammer drill lights up. The diode lights up
while the battery is being charged (13).
Under normal conditions of use the
hammer drill can be recharged several
hundred times.
ATTENTION! The recharging process
generates heat in the battery.
Note: The battery that is supplied with
the hammer drill has been charged for
test purposes only and must be fully
recharged before use.
First read the safety instructions and then
follow the loading instructions. Insert
the charge connector into the socket
(13) in the hammer drill. Then connect
the charger’s transformer (16) to the
electricity supply.
Make sure that there are no knots or
sharp bends in the cable.
The charger’s transformer and the battery
have been designed to be used together.
NEVER use this charger to recharge
cordless tools or batteries from other
manufacturers. The battery will gradually
lose its charge over a period of time, even
if the tool is not used.
The lithium-ion battery is protected
against deep discharging by the
“Electronic Cell Protec tion (ECP)”. When
the battery is empty, the ma chine is
switched off by means of a protective
circuit: The inserted tool no longer
rotates.
9

IKEA FIXA Specifications

General

Brand	IKEA
Model	FIXA
Category	Power Screwdriver
Language	English