IKEA HALLNAS User Manual

ENGLISH 9
Operation
Control panel
A
4321
A
Temperature setting button
1
-
4
Set temperature indicators
Note: Do not use sharp objects to operate the control
panel. They can scratch or damage the control panel.
Switching on
When you connect the mains plug to a power socket,
the appliance switches on and starts operating.
Display
Once initially powered on, the display screen is on full
display for 3 seconds.
Then the refrigerator runs at setting
3
which is the
factory default setting.
In case of a temperature sensor failure, the
corresponding indicators will blink.
Indicator status Fault
Indicators
1
and
4
are blinking.
Ambient temperature sensor
failure
Indicators
1
and
2
are blinking.
Refrigerator temperature
sensor failure
Indicators
1
and
3
are blinking.
Refrigerator defrosting
temperature sensor failure
Note: If there is a ashing failure, please call the
service center.
Setting the temperature
Recommended temperature: setting
3
.
•
You can set the temperature of the refrigerator
compartment via the control panel.
•
You cannot directly set the temperature of
the freezer compartment. But the colder the
refrigerator compartment, the colder the freezer
compartment.
•
When the appliance is plugged in for the rst time,
it sets the temperature to setting
3
.
To set the temperature, press the temperature setting
button
A
one or more times until the indicator for
the desired set temperature lights up. The appliance
will operate according to the new set temperature in
15 seconds.
The temperature changes in this order:
(cold)
(coldest)
Tips:
•
The lower the set temperature, the longer you can
safely store your food and the more electricity the
appliance consumes.
•
The higher the set temperature, the quicker your
stored food decays and the less electricity the
appliance consumes.
Super cooling mode
Note: The Super cooling function is specically
designed to rapidly cool down newly placed food in
the fridge compartment. If you have a signicant
amount of warm food, such as after grocery
shopping, it is recommended to activate the Super
cooling function. By doing so, you can ensure quick
cooling of the products and reduce the temperature
rise, thereby eectively prolonging the preservation
of all the other food items inside.
•
To put the appliance into super cooling mode,
press and hold the temperature setting button
A
for 3seconds. Both indicators
1
and
2
light up
and the appliance enters super cooling mode in
15seconds.
•
The appliance will automatically exit super cooling
mode after 6 hours. To exit this mode earlier, press
the temperature setting button
A
once.
Super freezing mode
Note: The super freezing function is designed to
maintain the nutritional value of food in the freezer
compartment. It can freeze the food in the shortest
time. If a large amount of food is frozen at one
time or the food needs to be frozen quickly, it is
recommended to turn on the super freezing function
and put the food in. At this time, freezing speed
of freezer compartment will be increased. Energy
consumption increases while the function is ON.
•
To put the appliance into super freezing mode,
press and hold the temperature setting button
A
for 5seconds. Both indicators
3
and
4
light up
and the appliance enters super freezing mode in
15 seconds.
•
The appliance will automatically exit super freezing
mode after 40 hours. To exit this mode earlier,
press the temperature setting button
A
once.
Switching o
•
To switch o the appliance, press and hold the
temperature setting button
A
for 10 seconds.
All indicators turn o and the appliance stops
operating in 15 seconds.

IKEA HALLNAS Specifications

General

Brand	IKEA
Model	HALLNAS
Category	Refrigerator
Language	English