ENGLISH 9
Charcoalltermaintenance(ifthehoodis
installedinrecirculationmode)
1. Unplug the appliance or disconnect the
power supply.
2. Remove the grease lter
3. Hook the carbon lter rstly to the metal
tab at the back on the hood.
4. Fix it at the front with the two knobs.
5. Ret the grease lter.
Unlike traditional charcoal lters, this
charcoal lter can be washed and
reactivated.
With normal hood use, the lter should
be cleaned once a month. The best way
to clean the lter is in a dishwasher at
the highest temperature possible, using
a normal dishwasher detergent. To avoid
particles of food or dirt settling on the
lter during washing and giving rise to
unpleasant smells, it is advisable to wash
the lter on its own. After washing, dry the
lter in the oven at 100°C for 10 minutes to
reactivate it.The lter will retain its odour-
absorbing capacity for three years, after
which it will have to be replaced.
Lampmaintenance
Disconnect the hood from the electricity.
Warning
Prior to touching the light bulbs ensure they
are cooled down.
1. Use a small screwdriver or other suitable
tool to prise off the cover.
2. Snap-t the cover back on.
3. Use only max 12V-10W- G4 halogen
bulbs.
IMPORTANT:make sure you don’t touch the
lamp with your bare hands.
To Next Page
Loading...
Need help?
General
