55
FAULT CAUSE TROUBLESHOOTING
Appliance cannot be
switched on or oper-
ated.
Appliance functions
have failed.
1. Pull out the mains plug or
switch off the fuse.
2. Wait at least 2minutes.
3. Connect the appliance to the
power supply.
4. Switch the appliance on.
Appliance does not
start.
The mains fuse has
tripped.
● Check the relevant fuse.
Mains cable is not in-
serted.
1. Check whether the socket
works.
2. Check whether the mains
cable is properly inserted in
the socket and on the rear of
the appliance.
Appliance door is not
closed properly.
● Close the appliance door.
Programme starts
automatically.
You did not wait until
programme ended.
● →"Terminate programme",
Page37
Appliance stops during
the programme or cuts
out.
Appliance door is not
closed properly.
● Close the appliance door.
Power and/or water
supply has been inter-
rupted.
1. Check the power supply.
2. Check the water supply.
Top basket is pressing
against inner door and
preventing appliance
door from being closed
securely.
● Check whether the rear
panel of the appliance is be-
ing pressed in by a socket or
hose holder that has not
been removed.
● Arrange the tableware so
that no parts project beyond
the basket and prevent the
appliance door from closing
properly.
Mechanical damage
FAULT CAUSE TROUBLESHOOTING
Appliance door cannot
be closed.
Door lock has been ac-
tivated.
● Close the appliance door
with greater force.