Problem Possible cause Solution
The fuse has blown out in the
household fuse box.
Replace the fuse.
After the check, switch on the appliance. The programme continues from the point of interrup-
tion. If the malfunction shows again, contact your After Sales Service.
When the cleaning results are not satisfactory:
Problem Possible cause Solution
The dishes are
not clean
The selected washing programme is
not applicable for the type of load
and soil.
Set different washing programme.
The baskets are loaded incorrectly
so that water cannot reach all surfa-
ces.
Load the baskets correctly.
Spray arms do not turn freely be-
cause of incorrect arrangement of
the load.
Make sure that the cutlery and
dishes do not block the spray arms.
The filters are dirty or not correctly in-
stalled.
Make sure that the filters are clean
and installed correctly.
The quantity of detergent is too little
or missing.
Make sure that the quantity of deter-
gent in detergent dispenser is correct.
Limescales
particles on
the dishes
The salt container is empty. Fill the salt container with salt.
The water softener is adjusted on a
wrong level.
Set the water softener.
The salt container cap is not closed
correctly.
Make sure that the salt container is
closed correctly.
The dishes are
wet and dull
No rinse aid has been used. Set the rinse aid dosage.
The rinse aid dispenser is empty. Fill the rinse aid dispenser.
There are
streaks, milky
spots or a blu-
ish coating on
glasses and
dishes
Wrong dosage of rinse aid. Decrease the rinse aid dosage.
Dry water
drop signs on
glasses and
dishes
Wrong dosage of rinse aid. Increase rinse aid dosage.
The detergent can be the cause. Use different type of detergent.
Technical data
Dimensions Width (cm) 59,6
ENGLISH 18
To Next Page
Loading...
Need help?
General
