EasyManuals Logo
Home>IKEA>Remote Control>Tradfri E1766

IKEA Tradfri E1766 User Manual

IKEA Tradfri E1766
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
WIRELESS OPEN/CLOSE REMOTE
FUNCTIONS
UP:
Press to move your wireless roller blind
up..
DOWN:
Press to move your wireless roller blind
down.
Pairing: Add IKEA Home smart products
to your system. See instructions below.
IMPORTANT NOTE: You need the Signal
Repeater to be able to steer your blinds with
the wireless Open/Close remote!
ADDING DEVICES TO YOUR
WIRELESS OPEN/CLOSE REMOTE
When the wireless Open/Close remote is sold
together with a wireless roller blind and a
Signal Repeater (in the same package), they
are already paired.
To add more wireless roller blinds, just repeat
the steps below:
Make sure that your wireless roller blind is
turned on.
1 Open the back cover of the Open/Close
Remote and nd the pairing button.
2 Short press on both buttons on the blind.
This will make the device awake and ready
for pairing for 2 minutes.
3 Hold the Open/Close remote very close to
the wireless roller blind you want to add: no
more than 5 cm away from .
4 Press and hold the pairing button for at
least 10 seconds on the wireless Open/
Close remote.
5 A red light will shine steadily on the Open/
Close remote. On your wireless roller blind
a white light will begin to dim and ash until
the devices have been successfully paired.
Up to 4 wireless roller blinds can be paired
with 1 Open/Close remote.
Make sure to pair them one at a time. If
you have difculties paring multiple blinds,
temporarily disconnect those that have
already been paired by removing the battery
cell inside. This will help with the pairing
process.
USING YOUR WIRELESS
ROLLER BLINDS
Move blind up to top position
using Open/Close remote.
Press the up button once (short press) on the
Open/Close remote
Move blind down to pre-set level
using Open/Close remote.
Press the down button once (short press) on
the Open/Close remote
Pull up blind using
Open/Close remote.
Press and hold the up button on the Open/Close
remote
While pressing the button the blind is raised
(until wished position or top position has been
reached), if the button is release the blinds
stop.
Pull down blind using
Open/Close remote.
Press and hold the down button on the Open/
Close remote
While pressing the button the blind is lowered
(until wished position or max has been
reached), if the button is release the blinds
stop.
Move blind up to top position
using buttons on Blind.
Single press the Upper (Top) button on the
Blind until blind has reaches the top position.
Move blind down to pre-set level
using buttons on Blind.
Single press the Bottom (Lower) button on
the Blind until blind has reaches the bottom
position.
Pull up blind using buttons on Blind.
Press and hold the Upper (Top) button on the
Blind.
Pull down blind using
buttons on Blind.
Press and hold the Bottom (Lower) button on
the Blind
ENGLISH 4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IKEA Tradfri E1766 and is the answer not in the manual?

IKEA Tradfri E1766 Specifications

General IconGeneral
BrandIKEA
ModelTradfri E1766
CategoryRemote Control
LanguageEnglish

Related product manuals