IKEA tradfri User Manual

REMOTE CONTROL FUNCTIONS
ON/OFF: Press to turn your light source on and off.
Press and hold for at least 3 seconds to synchronize
your lights.
Dim up/down: Short presses will dim up/down in
steps. To dim up/down seamlessly, press and hold
the button.
Change white spectrum, colours or scenes.
Pairing: Add IKEA Smart Lighting products to your
system. See instructions below.
ADDING DEVICES TO YOUR REMOTE CONTROL
When the remote control is sold together with a light
source (in the same package), they are already paired.
If the remote control is purchased separately, you must
manually pair it to your light source.
To add light sources, just repeat the steps below.
1. Make sure that your light source is installed and the
main power switch is turned on.
2. Hold the remote control close to the light source you
want to add (no more than 5 cm away).
3. Press and hold the pairing button
for at least 10
seconds. A red light will shine steadily on the remote
control. Your light source will begin to dim and ash
one time to indicate that it has been successfully
paired.
Up to 10 light sources can be paired with 1 remote
control.
Make sure to pair them one at a time. If the light sources
are close to each other, disconnect those that have
already been paired from the main power switch.
REMOVING DEVICES FROM YOUR
REMOTE CONTROL
1. Make sure the main power switch is turned on for the
light source you want to un-pair from your TRÅDFRI
remote control.
2. Hold the remote control close to the light source you
want to remove (no more than 5 cm away).
3. Press and hold the pairing button
for at least 10
seconds. A red light will shine steadily on the steering
device. Your light source will begin to dim and ash
twice to indicate that it has been successfully un-
paired.
FACTORY RESET YOUR DEVICES
For light sources:
Toggle the main switch 6 times.
For remote control:
Press the pairing button
4 times within 5 seconds.
SYNCHRONIZING
If your light source becomes unsynchronized, press
and hold the ON/OFF button
for at least 3 seconds
to return the light source to its default setting (100%
brightness, 2700K).
ENGLISH 22

IKEA tradfri Specifications

General

Model Number	E1526
Indoor Use	Yes
Brand	IKEA
Category	Gateway
Connectivity	Zigbee
Compatibility	IKEA Smart Lighting Products
Power	5.0V DC
Operating Temperature	0°C to 40°C
Model	TRADFRI
App Support	IKEA Home smart app