EasyManuals Logo

IKEA VALGJORD User Manual

IKEA VALGJORD
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
How to activate ExtraHygiene
Press , the related indicator comes on.
If the option is not applicable to the
selected programme, the indicator stays off.
The display shows the updated programme
duration.
The ExtraHygiene option is not applicable
for programme number:
P5 (Glass)
P6 (Rinse & Hold)
Settings
Programme selection mode and user
mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings can
be changed:
The activation or the deactivation of the
acoustic signal for end of programme.
The activation or deactivation of the
rinse aid empty notification.
The level of rinse aid according to the
required dosage.
These settings will be saved until you
change them again.
How to set the programme selection mode
The appliance is in programme selection
mode when the display shows the
programme number P4.
When you activate the appliance, usually it
is in programme selection mode. However,
if this does not happen, you can set the
programme selection mode in the following
way:
Press and hold RESET until the appliance is
in programme selection mode.
The rinse aid dispenser
The rinse aid helps to dry the dishes without
streaks and stains.
We recommend to always use rinse aid for
best drying performance.
The rinse aid is automatically released
during the hot rinse phase.
You can set the released quantity of rinse
aid between level 1 (minimum quantity) and
level 6 (maximum quantity). Level 0 will
deactivate the rinse aid dispenser and no
rinse aid will be released.
Factory setting: level 4.
How to set the rinse aid level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously and until
the indicators , and start
to flash and the display is blank.
2. Press
.
The indicators and go off.
The indicator continues to
flash.
The display shows the current setting:
e.g.
= level 4.
The levels of rinse aid are from
0A to 6A.
Level 0 = no rinse aid is released.
3. Press again and again to change
the setting.
4. Press the on/off button to confirm the
setting.
ENGLISH
11

Other manuals for IKEA VALGJORD

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IKEA VALGJORD and is the answer not in the manual?

IKEA VALGJORD Specifications

General IconGeneral
BrandIKEA
ModelVALGJORD
CategoryDishwasher
LanguageEnglish

Related product manuals