35
6.1 Automatic functioning.
e Zone Remote Panel allows automatic functioning, in
which a program manages the room temperature during
the hours of the day.
e desired room temperature can be adjusted onto two
independent levels: Comfort ( ) and Economy ( ) in
the Zone Setpoint menu, whose distribution throughout the
day or the week is managed by hourly programming. Press
the button until the icon switches-on on the display. e
Zone Remote Panelis factory set with a standard program
shown below. If this should not satisfy requirements, it is
possible to modify it as described in the chapter relative to
programming.
Status Description
Stand-by
Summer
Summer with
Cooling
Winter
Fig. 5
The system is designed to function on Comfort and
Economy temperature levels depending on the hour
program set. erefore also during operation on Economy
level, if the room temperature measured is below that set,
the appliance may function.
6.2 Temporary manual functioning (
).
If the room temperature is changed in automatic operation
(
- ), Temporary manual operation is activated. In
this mode, the room temperature will be regulated to the
value set until the next switch-on or switch-o phase of the
automatic program set.
e forced automatic function can be interrupted by simply
changing the operation mode.
To Next Page
Loading...
Need help?
General
