INFOSEC UPS SYSTEM – 15, rue du Moulin – 44880 Sautron – France – www.infosec-ups.com
hotline : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 07 19 AA 59 205 03
Select “” or “” function to adjust battery
voltage to real figure.
the voltage range is from 0V to 9.9V and the default
value is 0V.
you may choose or to adjust charger
voltage
the voltage range is from 0V to 9.9V and the default
value is 0V.
*Before making voltage adjustment, be sure to disconnect all
batteries first to get the accurate charger voltage.
* Any modification should be suitable to battery specifications.
you may choose or to adjust inverter A
voltage.
the voltage range is from 0V to 9.9V and the default
value is 0V.
* or is according to the output voltage what you set.
you may choose or to adjust inverter B
voltage*.
the voltage range is from 0V to 9.9V and the default
value is 0V.
*It will display number 1 under or to represent
inverter B voltage.
you may choose or to adjust inverter C
voltage*.
the voltage range is from 0V to 9.9V, the default
value is 0V.
*It will display number 2 under or to represent
inverter C voltage.
To Next Page
Loading...
Need help?
General
