FREQUENTLY ASKED QUESTIONS
1. HOW DO I TURN THE TERMINAL ON OR OFF?
• Hold down the Yellow button and the full stop button at the same time
to reboot the terminal.
• Press the Green button to turn the device on.
2. HOW DO I CHARGE THE PORTABLE TERMINAL?
Plug the two-pin plug of the charging base into the AC (220v) wall power
socket, turn the wall switch to On. Connect the cable to the charging base.
Place the Terminal down on the charging base. The battery indicator on the
terminal screen should indicate that it’s charging.
3. HOW MANY TRANSACTIONS CAN I DO BEFORE
I NEED TO BATCH THEM?
It is recommended that you keep the number of transactions in a batch
as low as possible. This will also improve the performance of the device.
- Transaction threshold is 200 transactions.
The device will prompt Transaction fi le almost full or Transaction fi le
full – Do a batch upload immediately.
4. HOW TO REPLACE THE PAPER
ROLL IN YOUR DEVICE:
14
To Next Page
Loading...
Need help?
General
