Inovance Easy501 User Manual

‑18‑
Item Specifications
Common terminal mode 8‑point/common terminal (The polarity +/‑ of
input power supply is changeable.)
Input action display The input indicator lights up (controlled by
software) when the input is in drive state.
1.3.4 Output Specifications
Item Specifications
Output type Transistor NPN
Number of output channels 8
Output voltage class 24 VDC±10% (21.6 VDC to 26.4 VDC)
High‑speed
output
(Y0 to Y7)
Output load
(resistive load)
0.5 A/point; 2 A/8‑point
Output load
(inductive load)
7.2 W/point; 24 W/8‑point
Output load (lamp
load)
5 W/point, 18 W/8‑point
Hardware response
time ON/OFF
< 1 us (OFF→ON); < 2 us (ON→OFF)
Load current
requirements
Load current ≥ 12 mA when used with outputs greater
than 10 kHz
Max. output
frequency
200 kHz for resistive load; 0.5 Hz for inductive load; 10
Hz for lamp load
PWM output Maximum frequency 200 kHz, minimum pulse width 2.5
us, minimum resolution 2.5 us, adjustable duty cycle
0.01% to 99.99%
Leakage current at OFF Less than 30 uA at 24 V
Max. residual voltage during ON Less than 0.5 VDC
Isolation mode Digital isolator
Common terminal mode 8‑point/common terminal (“‑” of power supply)
Short circuit protection Providing protection against short circuit of each circuit
(The short circuit protection state can be cancelled
through a power cycle.)

Inovance Easy501 Specifications

General

Brand	Inovance
Model	Easy501
Category	Controller
Language	English