‑4‑
Safety Instructions
■ Safety Precautions
1. Before installing, using, and maintaining this equipment, read the safety
information and precautions thoroughly, and comply with them during operations.
2. To ensure the safety of humans and equipment, follow the signs on the equipment
and all the safety instructions in this user guide.
3. "CAUTION", "WARNING", and "DANGER" items in the user guide only indicate some
of the precautions that need to be followed; they just supplement the safety
precautions.
4. Use this equipment according to the designated environment requirements.
Damage caused by improper use is not covered by warranty.
5. Inovance shall take no responsibility for any personal injuries or property damage
caused by improper use.
■ Safety Levels and Definitions
: Indicates that failure to comply with the notice will result in death or
severe personal injuries.
: Indicates that failure to comply with the notice may result in death or
severe personal injuries.
: Indicates that failure to comply with the notice may result in minor or
moderate personal injuries or damage to the equipment. Please keep this guide well
so that it can be read when necessary and forward this guide to the end user.
During Control System Design
● Provide a safety circuit outside the PLC so that the control system can still work safely
once external power failure or PLC fault occurs.
● Add a fuse or circuit breaker because the module may smoke or catch fire due to long‑
time overcurrent caused by operation above rated current or load short‑circuit.
To Next Page
Loading...
Need help?
General
