11
Dual-Zone Wine and Beverage Cooler
www.insigniaproducts.com
4 Push the door handle tightly against the door.
5 Insert the short end of the hex key into the set screw and tighten until
snug (do not overtighten). The set screw is not recessed into the
handle.
6 Repeat Step 5 for the other set screw, then repeat steps 3 through 5 for
the other handle.
7 Keep the hex key with these installation instructions for future use.
Front vent
This appliance is front vented. Do not block the front air vent. Doing so will
result in high operating temperatures, higher energy usage, and possible
system overheating and failure.
To Next Page
Loading...
Need help?
General
