Insignia NS-DWR3SS1 User Manual

8
www.insigniaproducts.com
Wash cycle selections
Cycle times are approximate and will vary with options selected. Hot
water is necessary to activate dishwasher detergent and melt fatty food
soils.
An automatic sensor checks the incoming water temperature and, if it is
not hot enough, the timer will be delayed to allow for the water to heat
for the main wash of all cycles. This happens even when Hi-Temp Wash is
selected, so that higher temperature will be available to handle heavier
soil loads.
Filter system
Your dishwasher has a multiple filter system which includes four separate
filter meshes. It separates dirty water and clean water into different
chambers. The multiple filter system helps your dishwasher to get better
performance with less water and less energy.
Smart wash system
Your dishwasher has a smart wash system under the normal wash and
auto wash programs which selects the wash cycle based on how large
and how soiled the load, permitting your dishwasher to clean more
efficiently every time. When a partial load of lightly soiled dishes is placed
in the unit, a short wash cycle is automatically selected. When a full load
of heavily soiled dishes is placed in the unit, a heavy wash cycle is
automatically selected.
Adjustable upper rack
The upper rack of your dishwasher can be raised or lowered to
accommodate loading dishes of varying heights in either rack. After
removing the 3rd rack, the upper rack clearance height can be adjusted
from 8" to 10" (20 to 25 cm). The lower rack clearance height can be
adjusted from 11" to 13" (28 to 33 cm). See Adjusting the upper rack
on
page 16
.
10" (25 cm)
8" (20 cm)
11.75"
(29.85 cm)
13.75"
(34.9 cm)

Insignia NS-DWR3SS1 Specifications

General

Brand	Insignia
Model	NS-DWR3SS1
Category	Dishwasher
Language	English