8
INSTALLATION INSTRUCTIONS
www.insigniaproducts.com
Unpacking your dryer
• Unpack your dryer and inspect it for shipping damage. Make sure that you have received all the items shown in
Package contents on page 5.
• To prevent personal injury or strain, wear protective gloves and use a furniture mover whenever lifting or carrying
your dryer.
Choosing a location
You should locate your dryer where there is enough space at the front for loading the dryer and enough space
behind for the exhaust system.
Your dryer is factory-ready for the rear exhaust option.
Make sure that the room you install your dryer in has enough fresh air and that there are no air-flow obstructions.
Warning
• Packing materials can be dangerous to children. Keep all packing
materials (such as plastic bags and polystyrene) well out of the reach of
children.
• Do not operate your dryer on the foam base cushion. Doing so will result
in serious vibration, which could cause equipment damage or result in
physical injury.
Important to installer
Read the following instructions carefully before installing the dryer.
These instructions should be kept for future reference.
• The dryer is not suitable for installation in a mobile home.
• Remove the door from all discarded appliances to avoid the danger of a
child being trapped and suffocating.
• After unplugging a discarded appliance, cut off the power cord.
• Provisions for introduction of outside air into the dryer room. The free
area of any opening for the introduction of outside air shall not be less
than twice the area of the dryer exhaust outlet.
Warning
Your dryer must be exhausted to the outside to reduce the risk of fire when
installed any place inside the house.
NS-FDRE67WH8A-C_NS-FDRE67WH8A_NS-FDRG67WH8A_17-0815_MAN_V5_EN.fm Page 8 Wednesday, November 15, 2017 12:25 PM
To Next Page
Loading...
Need help?
General
