Converter/adapter
outlet
Power indicator
Mode
switch
MAKING SURE YOUR DEVICE IS
COMPATIBLE
Warning: Failure to select the correct voltage setting could damage
your device.
1 Determine the voltage of the power outlet you want to use.
See the table on the back for common voltages.
2 Check the voltage of the device you want to connect to the
power outlet.
3 Compare the power outlet voltage to your device’s voltage,
then use the table below to decide which mode to use
(adapter or converter).
Note: The voltage of some devices will be a range. If your power
outlet voltage is in the range of your device’s voltage (for example, a
120-240V device and a 240V power outlet), use ADAPTER mode.
Check out these important
safety instructions to keep
yourself and your devices safe.
• Before using the converter/adapter, check the product you
intend to connect to the converter/adapter for the
manufacturer’s voltage and wattage rating, which should be
located on the product.
Caution: Adapter mode does not convert voltage. To avoid damaging
your device, select the Converter mode when appropriate.
• The Converter cannot be used with low-wattage appliances
(0–25W).
• The converter is designed to be used only for short periods of
time (approximately 10 minutes).
• Do not leave the converter/adapter in the power outlet when
not in use. Do not continue to use the converter/adapter if it is
not working properly, has been damaged, or dropped in water.
• Check your appliance label to see if it requires less than 2.5A.
• No grounding. This product is for use with unearthed or
double-insulated appliances only.
• The adapter-only function should be used with dual-voltage
appliances. The adapter/converter combo function should be
used with single-voltage appliances.
Warning: This product is intended for adult use. This product is NOT
intended for use by unsupervised children. Choose proper settings and plug
in this product before directly supervising children using devices connected
to this product.
Quick Setup Guide | NS-MTA1875 / NS-MTA1875-C
Travel Converter & Adapter
Before using your new product, please read
these instructions to prevent any damage.
PACKAGE CONTENTS
• Travel Converter & Adapter
• Quick Setup Guide
FEATURES
Notes:
• Use Adapter mode for dual-voltage devices (those listed as 110
V/220 V AC, 120 V/240 V AC).
• Use Adapter mode for devices such as laptop computers and
battery chargers because they automatically adjust to 110V or
220V power.
3-prong blades
Plug
selector
Flat angled and
parallel blades
Round pins
The power outlet
voltage is:
• The same as your device’s
voltage
• In the range of your device’s
voltage
• 100V and your device is 120V
• In a country with 110-120V AC
• Greater than your device’s
voltage
• In a country with 220-240V AC
• Less than your device’s voltage
Slide the mode
switch to:
ADAPTER
CONVERTER
Your device is not compatible.
Do NOT use this
converter/adapter with your
device
4 Check the wattage of your device.
If you use ADAPTER mode:
If you use CONVERTER mode:
Device wattage is:
275W max. at 100-120V
575W max. at 220-240V
576W or more
Instructions:
You can use this adapter.
See “Selecting your plug”
for further instructions.
Your device is not
compatible. Do NOT use this
adapter with your device.
Device wattage is:
0~25W
26~1875W
Instructions:
Your device is not
compatible. Do NOT use this
converter with your device.
You can use this converter.
See “Selecting your plug”
for further instructions.
BE
CAREFUL!
Adapter mode
To Next Page
Need help?
General