EasyManuals Logo
Home>Insignia>Refrigerator>NS-RFD26XSS3

Insignia NS-RFD26XSS3 User Manual

Insignia NS-RFD26XSS3
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
www.insigniaproducts.com
13
25.4 Cu. Ft. French Door Refrigerator
Leveling your refrigerator and adjusting the drawers
Leveling your refrigerator is important. If you do not level your refrigerator during installation, the doors may not close or
seal correctly which can cause cooling, frost, or moisture problems.
1 Turn the leveling feet at the front of the cabinet to raise (clockwise) or lower (counterclockwise) that side of your
refrigerator until your refrigerator is level side-to-side.
2 Turn both feet (by the same amount in the same direction) to slightly raise the front of your refrigerator. This helps the
doors close automatically.
3 If the edges of the refrigerator doors do not align with each other, turn the leveling foot on one side to adjust that
door’s height.
CAUTION: The rollers are not casters. Use the rollers to move your refrigerator forward or backward. Do not use the rollers to move
your refrigerator from side to side. You might damage the floor or the rollers.
Note: To make it easier to adjust the feet, have someone tilt your refrigerator while you adjust the feet.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Insignia NS-RFD26XSS3 and is the answer not in the manual?

Insignia NS-RFD26XSS3 Specifications

General IconGeneral
BrandInsignia
ModelNS-RFD26XSS3
CategoryRefrigerator
LanguageEnglish

Related product manuals