www.insigniaproducts.com
19
25.4 Cu. Ft. French Door Refrigerator
5 Use a (5/16" or 8 mm) socket wrench to remove the two screws attaching the glide rail to the bracket on the interior
panel of the drawer front.
6 Repeat Step 5 to detach the glide rail from the opposite side of the drawer front.
7 Using both hands, grasp the bottom of the drawer front. Pull the bottom of the drawer front toward you while lifting up
to remove.
8 Set the drawer front on a soft surface to protect the finish.
9 Slide the drawer glide rails into the cabinet.
10 Move your refrigerator through the doorway and into the room near the water and electrical connections.
Glide rail
Freezer drawer front
To Next Page
Loading...
Need help?
General
