6
Insignia 8-Bottle Wine Cooler
www.insigniaproducts.com
Components
Setting up your wine cooler
Before using your wine cooler
• Remove the exterior and interior packing.
• Clean the interior surface with lukewarm water using a soft cloth.
Finding a suitable location
• This wine cooler is designed to be free standing only, and should not
be recessed or built-in.
• Place your wine cooler on a floor, countertop, or cabinet that is strong
enough to support the wine cooler when it is fully loaded.
• Allow five inches of space between the back and sides of the wine
cooler and any surrounding walls. This allows the proper air
ventilation. Adjust the feet to keep the wine cooler level.
• Locate the wine cooler away from direct sunlight and sources of heat
(stove, heater, radiator, and so on). Direct sunlight may affect the
acrylic coating and heat sources may increase electrical consumption.
Ambient temperature below 59°F (15°C) or above 77°F (25°C) will
hinder the performance of this wine cooler. This wine cooler is not
designed for use in a garage or any other outside installation.
• Avoid locating the wine cooler in moist areas.
Leveling feet
Wine shelves
Hollow glass door
NS-WC8BK6_15-0650_MAN_V1_ENG.fm Page 6 Friday, July 24, 2015 9:41 AM
To Next Page
Loading...
Need help?
General
