EasyManuals Logo
Home>Intel>Motherboard>D845EPI

Intel D845EPI User Manual

Intel D845EPI
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Product Description
25
#
INTEGRATORS NOTE
ATA-66 and ATA-100 are faster timings and require a specialized cable to reduce reflections,
noise, and inductive coupling.
The IDE interfaces also support ATAPI devices (such as CD-ROM drives) and ATA devices.
The BIOS supports 48-bit Logical Block Addressing (LBA) and Extended Cylinder Head Sector
(ECHS) translation modes. The drive reports the transfer rate and translation mode to the BIOS.
The Desktop Boards support Laser Servo (LS-120) diskette technology through the IDE interfaces.
The BIOS supports booting from an LS-120 drive.
NOTE
The BIOS will always recognize an LS-120 drive as an ATAPI floppy drive. To ensure correct
operation, do not configure the drive as a hard disk drive.
1.8.4 Real-Time Clock, CMOS SRAM, and Battery
A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer
is not plugged into a wall socket, the battery has an estimated life of three years. When the
computer is plugged in, the standby current from the power supply extends the life of the battery.
The clock is accurate to ± 13 minutes/year at 25 ºC with 3.3 VSB applied.
#
INTEGRATORS NOTE
If the battery and AC power fail, custom defaults, if previously saved, will be loaded into CMOS
RAM at power-on.

Table of Contents

Other manuals for Intel D845EPI

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel D845EPI and is the answer not in the manual?

Intel D845EPI Specifications

General IconGeneral
BrandIntel
ModelD845EPI
CategoryMotherboard
LanguageEnglish

Related product manuals