6 Intel Desktop Board DH55HC Specification Update
Summary of Changes
The following table indicates the Specification Changes, Errata, Specification
Clarifications, or Documentation Changes that apply to the Intel
®
Desktop Board
DH55HC. Intel intends to fix some of the errata in a future revision of the desktop
board, and to account for the other outstanding issues through documentation or
specification changes as noted.
The following notations are used in the table:
Doc: Document change or update that will be implemented.
Plan Fix: This erratum may be fixed in a future revision of the desktop board, driver, or BIOS.
Fixed: This erratum has been previously fixed.
No Fix: There are no plans to fix this erratum.
Shaded: This erratum is either new or modified from the previous version of the document.
No. Plans Specification Changes
1 Doc Updated Section 2.2.2.2 and Section 2.2.2.6 of the Technical Product Specification as
shown in the Specification Changes Section below.
No. Plans Errata
There are no characterized erratum for this product.
Specification Changes
The Specification Changes listed in this section apply to the Intel
®
Desktop Board
DH55HC Technical Product Specification (Order Number E82983).
1. Updated Section 2.2.2.2 Add-in Card Connectors and Section 2.2.2.6 Front Panel
USB Headers of the Intel Desktop Board DH55HC Technical Product Specification as
shown below.
2.2.2.2 Add-in Card Connectors
The board has the following add-in card connectors:
• One PCI Express 2.0 x16: this connector supports simultaneous transfer speeds of
up to 8 GB/s of peak bandwidth per direction.
• Two PCI Express 2.0 x1: each of these connectors support simultaneous transfer
speeds of up to 250 MB/s (2.5 GT/s) of peak bandwidth per direction.
• Three Conventional PCI (rev 2.3 compliant) connectors.
To Next Page
Loading...
Need help?
General
