Intel DH61BE Product Guide

Intel Desktop Board DH61BE Product Guide
42
Follow these instructions to install a PCI Express x16 graphics card:
1. Observe the precautions in "Before You Begin" on page 29.
2. Place the card in the PCI E
xpress x16 connector (Figure 16, A) and press down on
t
he card until it is completely seated in the connector and the card retention notch
on the card snaps into place around the retention mechanism pin on the connector.
3. Secure the card’s metal bracket to the chassis back panel with a screw
(Figure 16, B).
4. Con
nect a monitor to the graphics card according to the manufacturer’s
instructions.
Figure 16. Installing a PCI Express x16 Graphics Card

Intel DH61BE Specifications

General

Brand	Intel
Model	DH61BE
Category	Motherboard
Language	English