Intel Solid-State Drive 320 Series User Manual

Intel
®
Solid-State Drive 320 Series
Intel
®
Solid-State Drive 320 Series
Product Specification September 2011
16 Order Number: 325152-002US
Intel
®
Solid-State Drive 320 Series
5.0 Supported Command Sets
The Intel SSD 320 Series supports all the mandatory ATA (Advanced Technology
Attachment) commands defined in the ATA8-ACS specification described in this section.
5.1 ATA General Feature Command Set
The Intel SSD 320 Series supports the ATA General Feature command set (non-
PACKET), which consists of:
• EXECUTE DEVICE DIAGNOSTIC
• FLUSH CACHE
•IDENTIFY DEVICE
Note: See Appendix A, “IDENTIFY DEVICE Command Data” on page 26 for details on the sector data
returned after issuing an IDENTIFY DEVICE command.
•READ DMA
•READ SECTOR(S)
• READ VERIFY SECTOR(S)
•SEEK
• SET FEATURES
•WRITE DMA
• WRITE SECTOR(S)
•READ MULTIPLE
•SET MULTIPLE MODE
•WRITE MULTIPLE
The Intel SSD 320 Series also supports the following optional commands:
• READ BUFFFER
• WRITE BUFFER
•NOP
• DOWNLOAD MICROCODE
5.2 Power Management Command Set
The Intel SSD 320 Series supports the Power Management command set, which
consists of:
•CHECK POWER MODE
•IDLE
• IDLE IMMEDIATE
•SLEEP
•STANDBY
• STANDBY IMMEDIATE

Intel Solid-State Drive 320 Series Specifications

General

Brand	Intel
Model	Solid-State Drive 320 Series
Category	Storage
Language	English