Need help?Do you have a question about the Intellian OW70L-Dac and is the answer not in the manual?
Defines warning, caution, and note statements used throughout the manual for safety.
Lists general handling and safety precautions for using the antenna and during installation.
Details RF exposure limits and safe operating distances for the equipment.
Introduces the OW70L-Dac terminal and its operation within the OneWeb constellation.
Lists the key features and capabilities of the OW70L-Dac terminal.
Outlines essential precautions and safety measures for a successful installation.
Covers site selection criteria including antenna location, CNX location, and minimizing satellite blockage.
Lists system package contents, primary/secondary antenna package details, and unpacking.
Lists additional equipment that needs to be provided by the installer or customer.
Provides step-by-step instructions for safely unpacking the system packages.
Outlines general requirements and factors to consider for mounting the ODU.
Provides the physical dimensions of the antenna radome and mounting base.
Advises on installing near cellular towers to avoid interference.
Details NPM assembly, base panel, fine-tune assembly, levelling, north point measurement, mounting, and concrete block placement.
Details the process of mounting the antenna directly onto a surface.
Guides on connecting the coaxial cable to the primary antenna and CNX unit.
Explains how to connect the primary antenna to the secondary antenna using various cables.
Provides instructions for properly grounding the antenna for safety.
Provides the physical dimensions of the Customer Network Exchange (CNX) unit.
Illustrates the standard dual antenna system configuration with the CNX.
Details how to connect cables to the back panel of the CNX unit.
Describes the front panel view of the CNX and its LED indicators.
Introduces the Local User Interface (LUI) for monitoring and controlling the antenna.
Specifies the browser requirement for accessing the OneWeb Web Interface.
Outlines the initial steps for powering on the system before accessing the webpage.
Details the navigation bar, home page layout, and footer elements of the LUI.
Covers RF cable setup and TILT calibration procedures for the antenna system.
Details the antenna setup, including True North Calibration.
Guides through the installation wizard: navigation, software upload, ephemeris data, levelling, and autonomous states.
Provides detailed RF, system, mechanical, and environmental specifications for the equipment.
Provides a checklist for installers to complete before system installation.
Lists recommended tightening torque values for various bolt sizes.
Details how to connect the power adapter for the heating module.
Provides instructions on how to use a lifting strap for antenna installation.
Lists separately sold accessory kits and items for the system.
Emphasizes the importance of proper connector waterproofing using self-amalgamating tape.
To Next Page
General
