(150IO) AP620C BUILT-IN ELECTRIC PUMP ENGLISH 4.875” X 7.25” 06/16/2019
English
150
IO
SAVE THESE INSTRUCTIONS
Page 2
General
•
No air pump maintenance is required.
•
Recommended working pressure: 0.025bar (0.36psi).
•
The appliance must be positioned so that the plug is accessible.
•
For cleaning use only mild soapy solution. Do not use any chemicals.
•
In case of repairs, use only common PVC repair glue and patches.
•
Rated maximum weight capacity: 64122 / 64132 / 64162 / 67766 / 64412 / 64426 / 64488 /
64902: 136 Kg (300 Lb);
64124 / 64126 / 64136 / 64164 / 67768 / 67770 / 64414 / 64418 / 64428 / 64490 / 64478 /
64904 / 64906 / 64448: 273 Kg (600 Lb).
NOTE:
Drawings for illustration purpose only. May not reflect actual product. Not to scale.
Due to a policy of continuous product improvement, Intex reserves the right to change
specifications and appearance, which may result in updates to the instruction manual,
without notice.
PARTS REFERENCE
In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out this appliance must not be supplied through an
external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the utility.
CAUTION
Part Descriptions:
1. AC line cord
2. Switch
3. Inflation mark ( )
4. Off mark (
)
5. Deflation mark ( )
6. Air passage
7. Cord compartment
8. Cord compartment cover
9. Airbed
9
3
4 5
2
6
7
1
8
INSTRUCTIONS
To Next Page
Loading...
Need help?
General
